Heskins conformable traction tape is perfect for applying onto an irregular surface such as diamond treads also known as checker plate or diamond plate.

If you have an irregular surface, you need a product that can cope with the intricacies of this demanding application. Diamond tread can be a very dangerous surface; it is potentially lethal when wet, creating a greater risk of slips. The levels of grip can also be very low; this is measured in Coefficient of Friction or (COF). Applying conventional tape does not work successfully, since the peaks and valleys result in stretching of the plastic film. Thus when applied into the valleys it will want to revert to its original flat state, this will then result in the tape lifting off the surface and becoming useless. Heskins conformable tape has a completely different construction that was designed to work perfectly as diamond plate tape.

When compared the conformable anti slip tape seems very similar to a conventional grip tape, but, instead of a plastic base we use a soft aluminum foil base. This ensures the conformable traction tape conforms to the surface properly. As with all of our tapes, this must also be applied to a clean dry surface. To apply conformable anti slip tape you simply press the tape onto the surface aligning it correctly and with use of a soft rubber mallet (which we can supply), hit the traction tape so it forms into the shape of the diamond tread pattern, reducing the chance of tears and material failure.

The upper surface of conformable anti slip tape is an abrasive mineral coat; the minerals that we apply ensure that the customer receives a product that provides Coefficient of Friction levels far in exceed any State or Federal requirement. Non slip flooring requirements are required on the MIL SPECS MIL-17951, MIL-5044 & MIL-PRF-24667, OSHA and Americans with Disabilities Act 2008.

APPLICATIONS

The optimal application temperature for CON is 50F or above.

    Optimal Service Temperature

Testing

At Heskins, we understand the importance of providing safety solutions that meet the highest standards, which is why our Conformable Anti-Slip Tape is rigorously tested for both performance and reliability. Designed to offer flexibility and durability, this tape adheres seamlessly to curved or irregular surfaces, providing consistent slip resistance. Our Conformable Anti-Slip Tape meets the strict criteria set by the National Floor Safety Institute (NFSI) getting a High-Traction certification, ensuring that it delivers dependable traction and enhances safety in a variety of environments. Whether applied to ramps, stairs, or other hard-to-cover surfaces, it provides an effective solution for preventing slips and falls in areas where safety is a critical concern.

Conformable Anti Slip Tape Sizes

Rolls of conformable anti slip tape are available in any width from ¾ inches up to 39 inches (black/yellow hazard chevrons is up to 20 inches ). We can produce any length (on request) from 5ft up to 300ft.

We can also produce die cuts, which are suitable for quick application to steps. A wide variety is available, but specific shapes can be produced also. Conformable anti slip tape can be produced in colors and prints matching your specifications. Our custom manufacturing is available dependent on order quantity.

For more information on conformable anti slip tape, or to place an order, please contact us by phone, email, live chat or the contact us form on the site.